Product show
Paramters
* Laser power: 7W/ 15W/20W/ 40W
* Wave Length: 445 ± 5nm
* Input Format: NC, BMP, JPG, PNG, DXF, etc.
* Machine power: 12V 5A
* Carving Speed: 0-50000mm/min
* Software: MAC OS and Linux Working with LightBurn; Windows working with LaserGRBL
| Laser Power |
7W |
15W |
20W |
40W |
| Actual output power |
1600MW |
4500MW |
5500MW |
6000MW |
| Laser wavelength |
445 ± 5nm |
| Spot type |
Dotted |
| Focus |
within 5-10 cm adjustable |
within 3 cm adjustable |
fixed focus can not be adjusted |
fixed focus can not be adjusted |
| Spot size |
0.15*0.01 mm |
0.03*0.04 mm |
| Drive mode |
external ACC constant current drive |
| Cooling method |
Forced Air Cooling |
| Operating voltage |
12V DC |
| Power supply |
12V 3A |
12V 5A |
| Shell material |
Aluminum, Surface Anodized |
| Module material |
Copper |
| life time |
20000 hours |
| Working temperature |
-40~75 Celsius |
| Remark |
We suggest 7W laser for Image Engraving |
We suggest 15W laser for Engraving Flammable materials |
We suggest 20W laser for 1-3mm corkwood/plywood |
We suggest 40W laser for cutting 1-5mm corkwood/plywood; 1-3mm MDF engraving metal, Better heat dissipation. |
Product Details
Laser and control board
Attention
Please wear goggles when operating the laser engraver. Wear safety goggles to avoid blindness.
-Please do not touch the laser emitter with your hand, or it may burn your hand.
-Please avoid strong impact on the machine.
-Children under 14 are not allowed to use this product and children over 14 need adult supervision.
-The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
-This product is not recommended for industrial cutting due to its high engraving speed.
FAQ
Q: Can it engrave/mark on gold or silver? Can it engrave/mark on all metal materials?
A: No, this machine can only mark on some stainless steel, iron and colorized anodised aluminum. It can not engrave/mark on gold or silver.
Q: Can it engrave any depth on metal?
A: No visible depth, it can only leave a marking.
Q: Can it cut wood?
A: It can cut normal wood of 3mm, Other wood material has not been tested yet.
Q: Can it engrave on carved surfaces(cylinder or alike)?
A: No, it works only on flat surface.
Audited Supplier 
){kind=link}